Booth Construction Rules and Regulations

    Click Here to download a copy

    Standard Booth

    All linear booths are 100 sq. ft. (10' x 10') unless otherwise noted on the floorplan. Booths have a back wall drape that is 8' high, with sidewall drapes that are 3' high. Total height of exhibits (including decorations) may not exceed 8' unless against a wall, which allows for 12' or prior approval from exhibit management. Display material for linear booths is restricted to a maximum height of 4' in the front 5' of the booth, and 8' in the rear 5' of the booth.


    Click for a larger view


    Peninsula Booth

    A peninsula booth is 20' x 20' or larger with aisles on three sides. The back wall of a peninsula booth must be on the non-aisle side and not exceed 16' in height. The back wall is restricted to 4' high within 5' of each aisle and 10' out from the back wall, permitting adequate line of sight for the adjoining booths. All portions on the rear of the back wall must be finished with no copy of any kind on it. Peninsula exhibits must be designed to be accessible from all three aisles. **Peninsula booths must sign off acknowledging sight line rules.


    peninsula new

      Click for a larger view


    End-Cap Booth

    An end-cap booth is exposed to aisles on three sides and composed of two booths, generally 10' deep by 20' wide. The back wall must not exceed 8' in height and only in the rear half of the booth space. The back wall is restricted to 4' high within 5' of each aisle, permitting adequate line of sight for the adjoining booths. **End-Cap booths must sign off acknowledging sight line rules.



      Click for a larger view


    Island Booth

    An island exhibit is an open area of exhibit space with aisles on all four sides. The entire cubic content of the space may be used up to the maximum allowable height of 16'. Approval by Yankee Exhibit Management is required if any exhibitors with island space plan to exceed 16', or require special consideration for their booth.  A variance form for this approval will be included in the Service Manual.



      Click for a larger view


    Hanging Signs

    All hanging signs must be pre-approved and receive written approval from Yankee Exhibit Management. A form will be included in the Service Manual. Hanging signs will only be permitted for island or peninsula booths. Signs suspended over peninsula booths must be set back a minimum of 5' from the back wall line of the booth.

    Questions?  Contact exhibits@massdental.org or (508) 449-6059


  • Exhibitor Warning
    Third party companies who are not official Yankee vendors, have been soliciting exhibitors for room reservations, lead retrieval units, list rentals, and other trade show products and services. These organizations may misrepresent themselves as Yankee official vendors. Exhibitors may be contacted by fax, e-mail, or phone with offers for cut rate services.  If you receive an email from a company trying to sell you a list; please note these are not actual attendee lists and these companies are NOT authorized Yankee vendors. Please visit Yankee’s list of Official Vendors. Direct any questions to Yankee Exhibits.

Presented by:

in cooperation with the dental societies of: